Standard products are widely used in biological and chemical fields, as laboratory chemical reagents, for its detection and management is more important. How to manage standard products is very important. The following small edition of Bolinda from the following three aspects to introduce you how to do a good job of standard product management.

How to manage standard products:

1. Reception of standard products. After receiving the standard product, check whether the outer package is intact, clean, sealed, the label is clear and complete, and fill H2-SOP1-QC-G006-R01 "Standard Product Storage Record" in time. The table should include name, storage conditions, storage location, deposit date, expiration date, specifications, batch number, content, quantity, bottle number, remarks (can be filled in the use of precautions), operator and other information. The monitoring of standards is an important job, so the professional knowledge and ethics of the staff are high, which is a sign of responsibility to the consumer.

2. Destruction of expired standards. Responsible for checking whether the benchmark standard is expired, and promptly transfer the expired benchmark standard to the container with the expiration mark for centralized destruction. Although the probability of such a situation is very small, it is indispensable in the link.

3. Management of standard product calibration report. The newly opened standard product should indicate the opening date on the bottle, and should be used in turn according to the bottle number. The standard product or working reference product of the same batch number must be used before opening another bottle. During the use of the standard product, the standard product that has been taken out is strictly prohibited to be put back into the original bottle. One-time usage should be considered when subpacking working standard products with few times of use or hygroscopicity.

The above content is the introduction of how to do a good job of standard product management, standard product storage should be checked by the administrator every day in the afternoon temperature, humidity and record. Where it does not meet the requirements of the provisions, it shall be adjusted and corrected in time. In rainy season, the custodian should increase the frequency of inspection. Different standard products should be selected according to their physical and chemical properties, storage requirements of different storage environment and conditions, respectively placed in the specified position.